Syskonnect SK-9E21D Bedienungsanleitung PDF herunterladen (Seite 31)

SysKonnect SK-9E21D 10/100/1000Base-T Adapter PCI Express

Promiscuous Mode / Multicast Support 33

Promiscuous Mode / Multicast Support

The SysKonnect SK-9E21D 10/100/1000Base-T Adapter, PCI Express, supports promiscu-

ous mode for analyzers. By default, the promiscuous mode is turned off. In addition, the

adapter supports multicast for special applications, which use multicast addresses.

Alert Standard Format (ASF)

The SysKonnect SK-9E21D 10/100/1000Base-T Adapter, PCI Express, fully supports inte-

grated ASF 2.0 (Alert Standard Format) functionality that enables monitoring and remote con-

trolling of client systems that are in “Shut down” or “OS absent” states.

Possible usage scenarios for ASF are:

• System’s Health Monitoring (e. g. Voltage and Temperature alerts)

• Asset Management (e. g. Chassis intrusion alerts)

• Remote Management and Control (e. g. Power down and System reset)

PXE / RPL Support

The SysKonnect SK-9E21D 10/100/1000Base-T Adapter, PCI Express, supports both the

standard PXE 2.1 (Pre-Boot eXecution Environment) and the protocol RPL (Remote Program

Load). This allows networked computers that are not yet loaded with an operating system to

be configured and booted remotely by an administrator. PXE resp. RPL grants the advantage

that client machines do not necessarily need an operating system or a hard disk and that they

can be rebooted remotely in the event of hardware or software failures.

Advanced Power Management / Wake on LAN

The SysKonnect SK-9E21D 10/100/1000Base-T Adapter, PCI Express, supports power man-

agement as defined in the PCI Bus Power Management Interface Specification V1.1 and Net-

work Device Class Power Management Reference Specification V2.0. The power

management features are implemented according to the Advanced Configuration and Power

Interface Specification V2.0.

The SysKonnect SK-9E21D Adapter utilizes an auxiliary power supply to keep some parts

running. This setting enables the PCI Express network device to “Wake on LAN”.

The Wake on LAN functionality uses three mechanisms to create a wake up event:

• OnNow Pattern Match Detect

Incoming packets are compared to up to seven patterns stored in a pattern matching

table. A match causes a wake up event.

• Magic Packet

Detect

The incoming data stream is searched for a so-called magic packet frame that consists of

6 bytes of 0xFF followed by 16 iterations of the adapter’s MAC address. If this sequence

is found, a wake up event is created.

• Link Change Detect

Any change of the link status will cause a wake up event.

Wake on LAN is supported by Windows 98 SE, Windows Me, Windows 2000, Windows XP

and Windows Server 2003.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

Keine Kommentare

Syskonnect SK-9E21D Bedienungsanleitung Seite 31